Flexpress 600 hot mounting press
● Modular structure of the unit
● 7 inch touch screen
● Built-in 20 common routines
● 4 pressure modes
● FlexPress 600M – Device base with a controllable screen
● FlexPress 600S – Mounting unit connected and controlled from the base
The Flexpress 600 hot mounting press was designed to meet specific customer needs. These specific needs can be met by adding the modular design of the mounting unit to the Flexpress 600. The modular unit is combined with one base unit and as many as five assembly units. The mounting unit itself can be freely connected and controlled directly from the base, which has a controllable 7 inch screen. The press software allows for as many as 20 typical procedures. The equipment has as many as four different pressure modes, which means that using the Flexpress 600 press, you can mount different materials. All these solutions result in the fact that the use of the Flexpress 600 hot mounting press is very convenient and extremely functional.
An optional cooling tank with four cooling modes can be attached to the Flexpress 600 hot mounting press. Our specialists will be happy to help you choose the right press.
| Device | FlexPress 600M – Device base with a controllable screen FlexPress 600S – Mounting unit connected and controlled from the base |
|---|---|
| Heating range | 20 – 200 degrees |
| Process time | 0 – 30 min |
| Pressure range | 0 – 600 bar |
| Mold diameter | 25.4; 30; 32; 38.1; 40; 50 mm |
|
|
